VOLTCRAFT VC940 - V06-09 Provozní pokyny Strana 41

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 45
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 40
MultiSystem 4010
Operating Instructions
© Hydrotechnik GmbH • All rights reserved
Rev. 1.5 / 120816 english
Page 41 of 45
6.10. Instrument Settings
Highlight the item „Device“ in the main menu and press :
These are the two screens with basic device settings. Press
to toggle between both pages. They
contain these options:
Language operation language of the instrument
Date current date, used in the names of measuring series
Time current time, used in the names of measuring series
ISDS enables the automatic detection of sensors with Hydrotechnik ISDS; this option
should be enabled if you use such sensors; if you want to use ISDS sensor for
unusual purposes (e.g. pressure sensors to measure force), you should disable
this option; if you select “Yes preferred”, detected ISDS sensors will be selected for
display and recording automatically
Units select between metric (SI) and anglo-american (US) unit system (e.g. bar – psi)
Filter enable / disable filtering
Filter settings see section 6.10.2 on page 42
Company enter the name of your company; this will be saved together with measuring data
Baud rate RS232 select the transmission speed of the RS 232 interface
Confirm the settings with
. Use three function keys to open submenus:
dialog to set the CAN parameters (option, see section 6.10.1 on page 41)
further instrument settings (see section 6.10.3 on page 43)
information on the instrument (see section 6.10.4 on page 44)
6.10.1. CAN settings
Open the submenu „Device“ from the main menu and press :
Here you may set the parameters of the optional CAN function:
Zobrazit stránku 40
1 2 ... 36 37 38 39 40 41 42 43 44 45

Komentáře k této Příručce

Žádné komentáře