
MultiSystem 4010
Operating Instructions
© Hydrotechnik GmbH • All rights reserved
Rev. 1.5 / 120816 english
Page 14 of 45
Hints for the treatment of the batteries
The life cycle of NiMH cells can be very long, but it depends on the conditions of use. Avoid a
complete discharge, continuous charging and immediate re-charging after every use. This triggers the
memory effect with a minimization of the battery capacity and possible remanent damage. You can
regenerate the battery by several discharge and charge cycles.
In case of low battery power a hint "Load batteries" will be displayed. In this case you should maintain
a 16 hour charging time. In case of longer periods without use you should discharge and charge the
batteries monthly.
5. First Steps
This section provides information for the daily use of the instrument. These operations are explained:
• switch instrument on and off
• select operation language
• connect sensors
• enter sensor parameters
• collect measuring data
• connect to a PC and transfer measuring data
• delete measuring data
• reset the instrument
After this chapter you will find a complete description of the instrument software with a chronological
presentation and explanation of all menus.
Information
The software HYDROcom is part of the delivery but will not
be described in this manual. Please see the online help
and the software manual.
5.1. Switch Instrument On and Off
Information
Assure before switching on that the desired ISDS sensors
are connected (see section 5.4 on page 16).
Komentáře k této Příručce