VOLTCRAFT VC940 - V06-09 Provozní pokyny stáhnout pdf (Strana 27)

MultiSystem 4010

Operating Instructions

Rev. 1.5 / 120816 english

Page 27 of 45

Highlight an item and confirm with

. Further options are displayed due to the selected occupation.

Settings at the functions “ChX-ChY” and „POWER”

Define these options here:

Meas. variable enter the variable resulting from the calculation

Index variable enter the index number of the variable if you have several identic

Units enter the name of the units resulting from the calculation

Name enter a name for the channel

Align. diff. function to compensate the measuring difference between two sensors;

connect both sensors and put an identic load on them (e.g. 0 bar); then

highlight this function and press

; the instrument determins both

measured values and uses a difference for the compensation during the

following measuring

Press

to save the channel settings.

Settings at the function „Chx/dt“

You may use this function e.g. to calculate speed from a measured way. You may define a threshold

value (“Level”) to prevent the calculation of absurd values for small way measurements. This assures

that a certain way has to be measured before a calculation is executed. The gate time assures for a

defined level that a calculation is executed after a certain time. This is the only way to assure the

calculation of a speed “0”.

Define these options:

Meas. variable enter the variable resulting from the calculation

Index variable enter the index number of the variable if you have several identic

Units enter the name of the units resulting from the calculation

Name enter a name for the channel

Level value for that the basic measured value must change, before a

calculation is executed

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 44 45

Žádné komentáře

VOLTCRAFT VC940 - V06-09 Provozní pokyny Strana 27