VOLTCRAFT VC940 - V06-09 Provozní pokyny stáhnout pdf (Strana 22)

MultiSystem 4010

Operating Instructions

Rev. 1.5 / 120816 english

Page 22 of 45

6.4. Configure Channels

Highlight „Channels“ in the main menu and press :

You can see a list of all twelve channels of the instrument. The first five are the physical input

channels (see section 3.2 on page 6), C6 and C7 are the trigger input resp. output. The other

channels can be used for calculations or may be occupied with digital input signals (e.g. CAN, option).

Use the arrow keys to highlight a channels and press

to open it.

6.4.1. Analog Input Channels (C1 … C3)

Highlight one of the channels C1 … C3 in the channel menu and press :

Use the arrow keys to highlight a menu item and press

to edit the displayed value / setting. The

menu items have these functions:

Meas. Variable type and units of the measurand of the sensor connected to this channel

Index Variable identic variables are indexed automatically

Name enter the desired name of the channel

Signal type select the signal type of the connected sensor (0/4-20 mA or 0/2-10 V)

Measuring range enter the start and end values of the measuring range

Zero point function to execute a zero point equalisation of the sensor; connect the

sensor with a load of „0“ (e.g. no pressure), highlight „Zero point“ and

press

; press to start the equalisation, then the compensation

value will be displayed

Linearisation here you may enter (or select) a linearisation table to compensate the

linearity error of the sensor (see below)

Press

after finishing the inputs to save all settings.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 44 45

Žádné komentáře

VOLTCRAFT VC940 - V06-09 Provozní pokyny Strana 22