VOLTCRAFT VC940 - V06-09 Provozní pokyny stáhnout pdf (Strana 18)

MultiSystem 4010

Operating Instructions

Rev. 1.5 / 120816 english

Page 18 of 45

5.7. Connect PC and transfer Measuring Data

Information

The software HYDROcom must be installed on your PC

before you are able to transfer measuring data.

1. Switch on measuring instrument and PC.

2. Plug the delivered USB cable into the connector at the side of the instrument (see section 3.2 on

page 6).

3. Plug the USB cable into an USB interface of your PC.

4. Wait until the instrument has been detected properly.

5. Execute the data transfer like described in the software manual.

5.8. Delete Measuring Data

Saved measuring series can be deleted in the delete menu:

Open the function:

[Memory]

Select measurement series:

Start deletion:

Confirm deletion:

In the shown example the measuring series 01, 02 and 04 are selected for deletion, a green check

mark is displayed left of them. Now you may:

selects all measuring series for deletion

deletes the selected measuring series

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 44 45

Žádné komentáře

VOLTCRAFT VC940 - V06-09 Provozní pokyny Strana 18